combination_belt_disc_sander
This is an old revision of the document!
The King combination belt/disc sander takes a 4×36“ belt and 6” adhesive backed discs. Please use dust collection with this tool. When changing the belt, flick the switch on and immediately off. Adjust the tracking if it's not running straight. When changing the disc, you may need to clean the residue of the old disc with acetone. Don't put a new disc on if the surface isn't clean. You'll waste a disc.
combination_belt_disc_sander.1509974105.txt.gz · Last modified: 2017/11/06 13:15 by glassgiant
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
