Differences

This shows you the differences between two versions of the page.

--- bandsaw [2017/08/21 02:52]
glassgiant
+++ bandsaw [2017/08/22 17:20]
glassgiant
@@ Line 1: / Line 1: @@
 ====== Bandsaw ======
-{{:2017-08-18_10.43.34.jpg?300 |}}The bandsaw is a 9" BS903 Ryobi.  **Blade size is 59 1/4 to 59 1/2 and 1/8 to 3/8 inch wide.**  This tool should be used with dust collection. The blade used should be appropriate to the material being cut, and the amount of curvature of the cut.  Wide blades should be used for thick material and straight cuts.  Narrow blades for thin material, and curvy cuts.  The blade guide should be lowered to just above the top of the material being cut.
+{{:2017-08-18_10.43.34.jpg?300 |}}The bandsaw is a 9" BS903 Ryobi.  This tool should be used with dust collection. The blade used should be appropriate to the material being cut, and the amount of curvature of the cut.  Wide blades should be used for thick material and straight cuts.  Narrow blades for thin material, and curvy cuts.  The blade guide should be lowered to just above the top of the material being cut.
+A big thank-you to [[http://schoonerlabs.com/|Schooner Labs]] for donating this!
 Manual: {{:tools:bs903_979_trillingual.pdf|}}
-**Maintenance:
+===== Consumables =====
-**The blade angle should in most cases be set to 90 degrees.  To do this, set the table angle to 0 degrees, then raise the blade guide fully.  Use a small square to confirm a 90 degree angle.
+* Blade size is 59 1/4 to 59 1/2 and 1/8 to 3/8 inch wide.
+===== Maintenance =====
+The blade angle should in most cases be set to 90 degrees.  To do this, set the table angle to 0 degrees, then raise the blade guide fully.  Use a small square to confirm a 90 degree angle.
 Blades should be sharp.  Dull blades won't cut well.

Halifax Makerspace Wiki

User Tools

Site Tools

Differences

Page Tools