User Tools

Site Tools


X4 CNC Mill


Will do approximately 11×15 inches.

The file types can be most anything, but typically we use an SVG file in Inkscape, preparing it for the CNC using, testing the GCode with and milling with Mach 3.

The CNC is open to all Halifax Makerspace members to use once training has been completed. To arrange for training, please email us.

Recommended settings: For hardwood with 1/8“ single flute end mill bit: spindle speed of 400, feed rate of 60 in/min, plunge of 30 in/min.

cnc_mill.txt · Last modified: 2020/12/01 13:22 by glassgiant