User Tools

Site Tools


cnc_mill

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
cnc_mill [2019/07/26 15:34]
glassgiant
cnc_mill [2019/07/26 15:39] (current)
glassgiant
Line 1: Line 1:
-====== CNC Mill ======+====== ​X4 CNC Mill ======
 {{ :​tools:​cnc:​x4-usermanual.pdf |Manual}} {{ :​tools:​cnc:​x4-usermanual.pdf |Manual}}
  
-{{ :​tools:​cnc:​2019-07-06_12.59.24.jpg?​400|}}We have a Carving X4 CNC mill.  It will do approximately 11x15 inches.  ​+{{ :​tools:​cnc:​2019-07-06_12.59.24.jpg?​400|}}Will do approximately 11x15 inches.  ​
  
 The file types can be most anything, but typically we use an SVG file in Inkscape, preparing it for the CNC using PartKam.com,​ and milling with Mach 3.  ​ The file types can be most anything, but typically we use an SVG file in Inkscape, preparing it for the CNC using PartKam.com,​ and milling with Mach 3.  ​
  
 The CNC is open to all Halifax Makerspace members to use once training has been completed. To arrange for training, please talk to a director. The CNC is open to all Halifax Makerspace members to use once training has been completed. To arrange for training, please talk to a director.
 +
 +Recommended settings:
 +For hardwood with 1/8" single flute end mill bit: spindle speed of 400, feed rate of 60 in/min, plung of 30 in/min.
  
cnc_mill.txt · Last modified: 2019/07/26 15:39 by glassgiant