User Tools

Site Tools


combination_belt_disc_sander

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
combination_belt_disc_sander [2020/12/01 13:20]
glassgiant
combination_belt_disc_sander [2020/12/01 13:20] (current)
glassgiant
Line 1: Line 1:
-{{ :​2017-08-20_21.31.09.jpg?​300|}}The King combination belt/disc sander takes a 4x36" belt and 7" adhesive backed discs. Please use dust collection with this tool.  When changing the belt, be sure to orient the belt the right way to avoid ruining the splice. ​ Flick the switch on and immediately off.  Adjust the tracking Knob if it's not running straight. ​ When changing the disc, you may need to clean the residue off the old disc with acetone and let dry completely. ​ Don't put a new disc on if the surface isn't clean. ​ You'll waste a disc.+The King combination belt/disc sander takes a 4x36" belt and 7" adhesive backed discs. Please use dust collection with this tool.  When changing the belt, be sure to orient the belt the right way to avoid ruining the splice. ​ Flick the switch on and immediately off.  Adjust the tracking Knob if it's not running straight. ​ When changing the disc, you may need to clean the residue off the old disc with acetone and let dry completely. ​ Don't put a new disc on if the surface isn't clean. ​ You'll waste a disc.
  
  
-Diesel Electric in Dartmouth can get parts for this+Diesel Electric in Dartmouth can get parts for this.
-{{ :​tools:​kc-705l-5_service_manual.pdf |}}+
combination_belt_disc_sander.txt · Last modified: 2020/12/01 13:20 by glassgiant