User Tools

Site Tools


This is an old revision of the document!

Always return the chuck key to it's designated spot on the drill press. Clamp your work if it is small or sharp. The drill press can grab stuff suddenly. If you're drilling, and it's not going easy, you are heating up the drill bit, which will quickly lose its temper and dull. If this happens, ease the bit out to allow the sawdust to clear and replunge it. When drilling metal, slower is better, and use cutting fluid. When drilling wood, fast is better.

drill_press.1504108018.txt.gz · Last modified: 2017/08/30 15:46 by glassgiant