User Tools

Site Tools


scroll_saw

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
scroll_saw [2017/10/03 18:48]
glassgiant
scroll_saw [2017/10/03 18:56] (current)
glassgiant
Line 1: Line 1:
 ====== Craftsman 16" Direct Drive Scrollsaw ====== ====== Craftsman 16" Direct Drive Scrollsaw ======
 {{ :​2017-08-18_10.43.49.jpg?​500|}} {{ :​2017-08-18_10.43.49.jpg?​500|}}
 +===== Consumables =====
 +5" pin-end scroll saw blades
 +
 +===== About =====
 +
 Scrollsaws are typically used in one or more of the following circumstances:​ Scrollsaws are typically used in one or more of the following circumstances:​
   * Cuts are in the interior of a workpiece (holes). ​ In this case, you would typically drill a hole big enough to feed the scrollsaw blade through, then reconnect the blade, make your cut, disconnect the blade and pull it back out of the piece.   * Cuts are in the interior of a workpiece (holes). ​ In this case, you would typically drill a hole big enough to feed the scrollsaw blade through, then reconnect the blade, make your cut, disconnect the blade and pull it back out of the piece.
scroll_saw.txt · Last modified: 2017/10/03 18:56 by glassgiant